High throughput dental metal printer for small, dense, complex dental prostheses. High-performance dental software solution streamlines your workflow.

The ProX DMP 200 Dental system uses Direct Metal Printing (DMP) to produce high quality, metal dental prostheses at high speed. Dental Laboratories can now eliminate various steps and substantially reduce unit cost per partial while maintaining or increasing quality. With its 140 x 140 x 115 mm (5.51 x 5.51 x 4.53 in) build platform, certified Ni-free CoCr materials for dental use, manual material loading and the ProX DMP 200 Dental system is a perfect starting point for dental laboratories.
ProX DMP 200 angle printer image
ProX DMP 200 front printer image
ProX DMP 200 angle printer image
ProX DMP 200 front printer image

About this printer


Best Surface Finish, Less Supports

With a surface finish quality of up to 5 Ra μm (200 Ra micro-inches) less post-processing is required and sharpest corner radiuses are achieved. Due to the proprietary powder deposition system, the ProX DMP 200 builds down to 20° angles without supports. All overhanging surfaces benefit from this much better surface quality compared to competing machines. Less supports and improved surface quality ultimately mean less post-processing and less material usage for your laboratory saving time and cost.

Outstanding Accuracy for the Perfect Fit

The typical accuracy is +/-50 μm (+/-0.002 inches), allowing a perfect fit for every patient. Repeatability from part to part is approximately 20 μm (0.0008 inches).

Fully Dense Parts with Fine Detail and Thinnest Walls

Due to 3D Systems’ patented layer compaction technology, the ProX DMP 200 Dental printer produces fully dense partials, crowns, and bridges, eliminating the porosity you can find with casting processes. The patented technology also allows using smaller particles, which in turn helps to generate the finest feature detail available in the market and thinnest possible wall thicknesses.

Dental Software to Streamline Workflow in Laboratories

To streamline your workflow, the ProX DMP 200 Dental printer includes a high-performance software solution for managing the manufacture of fixed and removable dental prostheses. This seamless, intuitive interface quickly guides you from dental file import to the creation of manufacturing files.

  • Dental partials
  • Crowns
  • Bridges
  • Complete solution (printers, certified materials, software and application support) and high-performance software solution from dental file to production
  • Exceptional surface finish and resolution
  • Shortest post-processing in the market
  • High productivity (200 units in 9hs)
  • Minimal waste of materials
  • Consistently high accuracy parts even on first-time builds
  • Ease of use - intuitive workflow
Tech Specs
  • Uses Direct Metal Printing (DMP) technology
  • Build volume: (W x D x H): 140 x 140 x 115 mm (5.51 x 5.51 x 4.53 in) height inclusive of build plate
  • LaserForm CoCr (C) material is ISO 13485, ISO 9001, FDA and CE qualified
  • Fully dense parts, no porosity
  • Highest precision
  • The surface finish quality of up to 200 Ra micro-inches (5 Ra μm)
  • Intuitive dental production software for part set-up and production

Interested in purchasing this printer?

3D マーケティング関連の受信に同意する
3D Systems からのスペシャルオファー、製品の最新情報、イベントニュースの受信を希望されますか?3D Systems または当社のパートナーからのフォローアップを希望される場合は「はい」を選択してください。当社からのご案内の受信は、いつでも解除できます。当社のプライバシーポリシーを表示するにはこちらをクリックしてください。また、設定の管理はこちらをクリックしてください。